PDA

View Full Version : Shaft grease


Honeygirl
03-06-2008, 01:35 PM
Works great doesnt turn or wash off
http://i177.photobucket.com/albums/w201/honeygirl26/DSC01616-1.jpg
NoSlack
03-06-2008, 09:12 PM
http://i177.photobucket.com/albums/w201/honeygirl26/Boat%20shit/DSC01616.jpg
NoSlack
08-17-2008, 11:30 AM
Just pulled my props for the second time after switching to Mobil AW2 grease on the shafts. Went about 75 hours between maintenance intervals and the props slid right off. I use the same grease at work for all the electric motor bearing so I thought I would give it a try on the props, sense nothing else worked for me.

Mike

http://www.dragosupply.com/files/3/categories/15/63/img_D5475100.jpg
DOGHOUSE26
08-17-2008, 08:38 PM
That blue trailer bearing grease didn't work for you? I did my old 571DP gas props with it and after 5 years in storage the props came off just fine, just tapped them and off they came. I will admit I never go cheap with the amount of grease on the splines though.
NoSlack
08-17-2008, 09:03 PM
I don't think I ever tried the one Joe uses. I tried a couple different marine greases and they all turned to concrete after 50 hours.

Mike
IRish Wake
08-19-2008, 12:40 AM
Mike,sent you an E-mail re:my floscan.Did you get it? kev
NoSlack
08-19-2008, 04:07 PM
Didn't get any email.

Mike
IRish Wake
08-20-2008, 08:01 AM
Mike,did a pm,I think.Let me know if it worked. kevin
NoSlack
08-20-2008, 12:38 PM
Nothing in the in box as of noon. Sent you a PM with my number

Mike
Honeygirl
08-20-2008, 02:51 PM
I used the blue bearing grease and as mike stated it tured hard on me. I now use the triple guard and ever 100 hours I pull the boat and the grease is as I just put it on. The vovlo tec is the guy who told me to use it.