'The Reel One' Winter Project Saga continues

[Wizard]

Been keeping busy working on most of the boat at night, because most of the boat is in the garage.

Pictures below of Outdrive before/after, Transom Plate before/after, Building/fitting a new rear transom deck cover in progress, and Re-doing all the fiberglass around the transom cutout.

Outdrive Before Overhaul:
http://www.bocapix.com/data/500/medium/Outdrive_before2.jpg

Outdrive After Overhaul:
http://www.bocapix.com/data/500/Outdrive_after.jpg

Transom Plate Before Overhaul:
http://www.bocapix.com/data/500/medium/Transom_Plate_Before.jpg

Transom Plate Overhaul in Progress:
http://www.bocapix.com/data/500/medium/Transom_Plate_After.jpg

Re-Doing Fiberglass in Trainsom Cutout:
http://www.bocapix.com/data/500/medium/Redoing_Fiberglass_in_transom_cutout.jpg

Engine Compartment without Rear Transom Deck Cover that was junk, after repaint:
http://www.bocapix.com/data/500/No_rear_deck_cover.jpg

Building new, fitting new, Rear Transom Deck Cover Section:
http://www.bocapix.com/data/500/medium/Rear_Deck_cover_in_progress.jpg

New cover will be fiberglassed on both sides, unlike original.

On track to have back together by March 1.

[DOGHOUSE26]

I'd have bet a week's wages you went to Outdrive Exchange !

[Knot Now]

Glen,
Don't forget to increase the hole in the transom (inside the plate), so you can remove your outdrive angle indicator and steering arm. Nice work BTW... When's the next opening in boat yard :D If you need any help, give me a call.
Phil

[saltwaters]

Glenn,

Nice work. I sure wish I could put my boat on a trailer, in the garage to work on her. This one day per week thing is making my restoration of the 50-50 a long project.

I'm starting to work on teak so I'm making some headway.

Thanks for sharing the photos.

Bill