PDA

View Full Version : Leaky Winshield



Royal Hook
11-29-2006, 08:37 PM
I'm needing to repair my winshields which have defective seals and wondering what the best method to attack the problem is. Try and find the proper rubber seals or clean out slot and use the black weather strip silicon?
Any advice would be appreciated.
Mike

NoSlack
11-29-2006, 09:15 PM
Did mine last year. Had a little trouble keeping the new seals in the grove until I cleaned out all the old sealer and use some high tech caulking to hold the seals in place. The side benefit to this project was the firming up the whole flybridge.

read about my project at http://www.bocaboard.com/forum/showthread.php?t=711&highlight=windows

Mike

Royal Hook
11-30-2006, 07:40 PM
Why did I have the sinking feeling that you'd respond back Mike. Your info will save me some time. Thanks