Printable View
With our deck being uncomfortably soft in many areas, and keeping in mind all of the termite damage I found when replacing the seat and the engine cover I am now proceeding with removing the deck (and possibly stringers/bulkheads).
I will post photos as progress moves forward :-)
I'm hoping to be done in a couple months. Trying to be more realistic about this timeline as compared to my previous projects on this boat...
-Brian
If you haven't started, put it off until the fall. You can easily double at time line and miss out on what could be a epic fishing season.
I've been putting mine off to the fall for the past 15 years. I'm sure I'll push it off again this fall.
Mike
Fiberglass is already removed... Getting at the screws now.
Brian, i did the deck on my Outerbanks, found out i had a bad fuel tank, check it close, good time to change it,,also make sure to glass both sides of the plywood,,i used 1708 cloth, it has three layers of glass, saves a lot of time,,good luck, Kelly
Will do Kelly,
Thanks for the tip. The deck has come up remarkably easy. Unfortunately, a lot of that was due to the incredible amount of rot and termite damage. So now I am looking at a deck-less boat and making decisions on pieces of support structure that needs replacing. It feels good to have made the jump into doing something as "large scale" as this. I had avoided it since we bought the Little Provider. So here we go....
I am wrapping up foam removal (which was soaked with water), and beginning the process of pulling all of the "sub deck". The deck is supported by a number of 1.5" X 1.5" strips of wood that follow the stringers and bulkhead. Those are coming out and I will eventually remove the bulkheads as they are rotten in a few places where they came in contact with the deck support wood.
All in all, it's been a great family project! I will post some photos when I have a chance.
-Brian
Hi Brian
Can we get an update? I have thought about this a few times myself but have been lucky enough to be able to put it off.
Pics would be a bonus.
What year is your boat?
you may want to try the honeycomb stuff...light and will not rot.
The boat was built in 74'. The hull is in great shape. There was just a ton of water and termite damage to the deck/seat/engine cover/bow hatch area. When my wife and I first bought it, our plan was to do a little superficial stuff to it and then just enjoy it. There are some threads of those projects on this site. One thing led to another, and we just began digging into the worn out stuff to a point that we ended up with the hull and stringers. It has been so much fun moving along in this project with my wife, son, mom, dad, and a new friend that we have made that used to build boats at Blackman. My Mom unexpectedly passed away 5 months ago and this boat was really a fun focus of our spending time together, so bringing it back has turned into something more for me now. I have tone of photos documenting all the different stages of restoration. I will upload them soon.Quote:
Originally Posted by Old Blue
Thanks for the interest :-)
Brian
Thanks for the info Wa Mei.Quote:
Originally Posted by Wa Mei
We ended up going with marine ply, glassing the deck side and soaking the underside with resin/gelcoat.
Thanks again,
Brian
Well she is pretty close to ready for this summer.
The Deck ended up coming off... along with almost every additional piece of the boat. What I calculated to be a "project" of a couple months turned out to be an amazing adventure that wove its' way through little over a year.
I just want to say thank you to Mike Cederwall for literally rebuilding this whole boat from the hull up, John Benson for humoring me when I showed up at his shop with a motor, an outdrive, and boxes of parts, and Bob Malone for making new beautiful cushions and an amazing new cover to wrap our boat in.
What was done:
1) New bulkheads
2) New upper and lower decks
3) Lower deck was raised 2 inches
4) New scupper placement
5) New fuel tank
6) Transom repaired/repainted
7) Remodeled fish hold and engine compartment
8) New hatches
9) Remodeled console
10) New engine box
11) New seat
12) New electronics box
13) New bait tank
14) New pumps, valves (brass), etc...
15) New thu-hull transducer
16) All wiring/electrical replaced
17) All plumbing replaced
18) New trailer
Don building her:
http://www.bocapix.com/data/500/IMG_4350.JPG
When Don owned her:
http://www.bocapix.com/data/500/Donshirleyblackman.jpg
The day I bought her:
http://www.bocapix.com/data/500/IMG_6085.JPG
What she was reduced to:
http://www.bocapix.com/data/500/clear_hull.jpg
What she is now:
http://www.bocapix.com/data/500/IMG_6296_resize.jpg
http://www.bocapix.com/data/500/IMG_6297_resize.jpg
http://www.bocapix.com/data/500/IMG_6295_resize.jpg
http://www.bocapix.com/data/500/IMG_6299_resize.png
Nice build. Don would be pleased to see the old girl looking so good.
Nothing to do but get out and enjoy now.
Mike