Works great doesnt turn or wash off
[IMG][/IMG]
Shaft grease
Works great doesnt turn or wash off
[IMG]
NoSlack-------------------------------------------<'(((>{
Mobil AW2
Just pulled my props for the second time after switching to Mobil AW2 grease on the shafts. Went about 75 hours between maintenance intervals and the props slid right off. I use the same grease at work for all the electric motor bearing so I thought I would give it a try on the props, sense nothing else worked for me.
Mike
NoSlack-------------------------------------------<'(((>{
That blue trailer bearing grease didn't work for you? I did my old 571DP gas props with it and after 5 years in storage the props came off just fine, just tapped them and off they came. I will admit I never go cheap with the amount of grease on the splines though.
I don't think I ever tried the one Joe uses. I tried a couple different marine greases and they all turned to concrete after 50 hours.
Mike
NoSlack-------------------------------------------<'(((>{
Mike,sent you an E-mail re:my floscan.Did you get it? kev
Didn't get any email.
Mike
NoSlack-------------------------------------------<'(((>{
Mike,did a pm,I think.Let me know if it worked. kevin
Nothing in the in box as of noon. Sent you a PM with my number
Mike
NoSlack-------------------------------------------<'(((>{
I used the blue bearing grease and as mike stated it tured hard on me. I now use the triple guard and ever 100 hours I pull the boat and the grease is as I just put it on. The vovlo tec is the guy who told me to use it.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
