+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Putting seaboard on the bunks

  1. #1
    Join Date
    Jul 2005
    Location
    Lemon Grove
    Posts
    356

    Default Putting seaboard on the bunks

    I talked to a friend today, that was at the launch ramp at Shelter Island just before I went fishing on Sunday. He said that my boat looked very heavy and it took a lot to launch off the trailer. He suggest something that I never thought about. He said he helped a friend bring a boat from back east that was a 30 ft. boat. The trick to launch a heavy boat is too install seaboard on the bunks and the boat should slide off a lot easier. He said it did not have to run the full length of the bunk. Does that sound doable to anyone out there? I will need to get some material that is think enough and will take a counter sunk screw. That may solve my problem, without extending the tongue.

  2. #2
    Join Date
    Apr 2004
    Location
    San Diego
    Posts
    381

    Default

    It will also be sliding when you step on the brakes, accelerate and go up hill and down hill. It’ll need lots of tie downs and to be chained to the trailer really well. I’m not sure I like the idea.
    Yale
    "Riley"
    32' Blackman Sportfisher

  3. #3
    Join Date
    Apr 2004
    Location
    La Jolla, CA
    Posts
    59

    Default

    I do not know what brand of trailer you have but I had a Pacific trailer for my 26' Billfisher. I had Pacific install star board type, I think it was more telfon, material and it worked like a charm. The boat never moved, I had no tie downs other than the bow strap. I towed it twice to Mag Bay. It sure made launching and retrieving a breeze for my wife and I. I would sure call them. They are in Chino.

  4. #4
    Join Date
    Apr 2004
    Posts
    2,067

    Default

    Al,

    Call San Diego Plastics in National City for the best price on starboard

  5. #5
    Join Date
    Jul 2005
    Location
    Lemon Grove
    Posts
    356

    Default

    I have replaced my door with the stuff and it was around $80. They do have some in the scrap bin but I may as well get a full sheet. Not sure if I will put one entire section or break it up in sections. I do not think it will slide due to a safety chain and the 15,000 lb. rated strap. I will post a message on Bloody decks to see if anyone else has used the stuff. I do not think it will get brittle and break due to the sun not hitting it, only when I am in the water. Glad to hear that someone has some experience using it.

  6. #6
    Join Date
    Apr 2004
    Posts
    2,067

    Default

    I think I would use 1/2" material, I don't think you need 3/4" if you're going over solid wood.
    Last edited by DOGHOUSE26; 07-02-2009 at 04:31 PM.

  7. #7
    Join Date
    Jul 2005
    Location
    Lemon Grove
    Posts
    356

    Default

    Jeff, the bunk boards are about 4" thick, doubled up 2X4, to keep the boat raised away from the fenders. I will counter sink the starboard with flat philip, not sure the size yet. Will only need one ever12" to 18", maybe further away. Thanks for any and all suggestions offered. Will probably router all edges.

  8. #8
    Join Date
    Jul 2005
    Location
    Lemon Grove
    Posts
    356

    Default

    Spoke to the previous owner about the boat being difficult to launch. He said that his sons lobster boat had some problems and he used silcone spray on the front portion of the bunks, to help in launching the boat, but watch out the boat does not slip off the trailer, use safety chain, etc. I guess that will be my next process to help launch the boat. I do not think it will slip off the trailer that easily.

  9. #9

    Default

    Quote Originally Posted by Al Gagnon View Post
    Spoke to the previous owner about the boat being difficult to launch. He said that his sons lobster boat had some problems and he used silcone spray on the front portion of the bunks, to help in launching the boat, but watch out the boat does not slip off the trailer, use safety chain, etc. I guess that will be my next process to help launch the boat. I do not think it will slip off the trailer that easily.
    Anecdotally, that is the biggest danger since you don't have the stern tie-downs on yet. That being said, I've never heard a firsthand (or even secondhand) account of a boat slipping off. It's always a friend-of-a-friend's-friend.

  10. #10
    Join Date
    Mar 2007
    Location
    Anza, Ca
    Posts
    181

    Default

    Quote Originally Posted by iclypso View Post
    Anecdotally, that is the biggest danger since you don't have the stern tie-downs on yet. That being said, I've never heard a firsthand (or even secondhand) account of a boat slipping off. It's always a friend-of-a-friend's-friend.
    I have seen it in person 3 times at Oceanside. It is NOT a pretty sight. One of the times it was a friend of mine, and it was the first trip an a brand new boat. I was about ten feet away wen the boat hitthe deck and it scared the s**t out of me. Believe it or not the tow bill for the two trucks it took to get the boat back on the trailer was more than repairing the damage to the boat.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts