+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: "Patron" 2003 26' Billfisher

  1. #1
    Join Date
    Apr 2004
    Location
    Spring Valley
    Posts
    2,692

    Default "Patron" 2003 26' Billfisher

    “PATRON”

    2003 BLACKMAN BILLFISHER

    · AD41P VOLVO DIESEL

    · MASTERVOLT 3.5KW GENERATOR

    · DUAL STATION CONTROLS

    · DECK SHOWER

    · 6 GALLON HOT WATER HEATER

    · SONY CDX-MP30 CD/MP3 PLAYER

    · MAXWELL FREEDOM 500 WINDLASS

    · MICROWAVE WIRED TO GENERATOR AND SHORE POWER

    · BIMINI FULL ENCLOSURE

    · WINDOW COVERS

    · FULL CANVAS COVER

    · FURUNO 24 MILE RADAR

    · FURUNO SOUNDER

    · FURUNO GPS/PLOTTER

    · SIMRAD AUTOPILOT ON BOTH UPPER AND LOWER STATION

    · WATCH CLOCK PROGRAMABLE WATCH ALARM

    · STANDARD HORIZON VHF W/REMOTE STATION IN CABIN

    · 25 AMP BATTERY CHARGER

    · REFRIGERATOR

    · FLOW SCAN

    · FILLET TABLE W/BRACKET

    · BRUCE ANCHOR W/250 COMBO CHAIN AND ROPE RODE

    · POMPANEETE OUTRIGGERS 16’ STIFF

    · 18 ROD HOLDERS

    · SALTWATER WASHDOWN

    · FRESHWATER WASHDOWN

    · PORTA POTTI / PUMP

    · UPGRADED WIRING

    · POLK ATRIUM 45 SPEAKERS

    · 12 VOLT RECEPTACLES FOR DOWNRIGGERS

    · JABSCO BAIT PUMP W/BACK UP PUMP

    · BENNETT TRIM TABS

    · 2 SETS OF CABIN CUSHIONS

    · LED HOUSE LIGHTS

    · NEW OUTDRIVE 2006 W/ 200 HRS

    · 15,000 LBS TRAIL RITE TRAILER

    · $75,000

    · Mike McCormick (310-678-8294)









    NoSlack-------------------------------------------<'(((>{

  2. #2
    Join Date
    Apr 2004
    Location
    Mar Vista Ca.
    Posts
    149

    Default 2003 Blackman Billfisher

    Ok fellow Blackman Owners;

    Is the Patron priced fair? What do you guys think?



    Thanks


    Mike

  3. #3
    Join Date
    Jan 2006
    Posts
    415

    Default

    very even on the cheaper side

  4. #4

    Default

    A steal at 75k just a down market I would wait to sell if you can.

  5. #5
    Join Date
    Apr 2004
    Posts
    2,067

    Default

    I think it's cheap, but that's about the most you can get in this economy. A 1988 Billfisher with low hours (1750), excellant shape, full cover , good trailer, decent electronics in the regular market would have sold for 55-60K just sold for 40K; so I think you're priced right, but there are not that many buyers out there right now and financing is a bitch!

  6. #6
    Join Date
    Apr 2004
    Location
    Mar Vista Ca.
    Posts
    149

    Default

    PRICE DROP TO 70K

    *New Eisenglass
    *New Helm Seat and Backrest
    *New Batteries (4)
    *New Bottom and Outdrive Paint
    *Motor and Outdrive Serviced
    *PowerMover Trailer Dolly
    *Squid Lights
    *Huge parts cache

    310-876-4757
    Last edited by Mac Attack; 03-26-2011 at 03:15 PM.

  7. #7
    Join Date
    Dec 2009
    Location
    Oceanside
    Posts
    123

    Default

    I think that is cheap as well. It is definately a buyers market. Like Jeff said financing is a bitch, but with the age of your boat it may be possible. When we got the real nasty 1987 w 1750 hrs we absolutely could not get financed. we tried everything all the way to 70% down. there reason was they did not have any comps, but I think since your boat is less than 10 years old it may be possible.
    Eric 26 Billfisher "REEL NASTY"

  8. #8

    Default

    I cruised to Cedros with Yale when he had the Patron, and that thing is bitchin. All the bells and whistles.
    Tenacious

  9. #9
    Join Date
    Apr 2004
    Location
    Mar Vista Ca.
    Posts
    149

    Default

    Yes, I agree, Yale does know how to outfit a boat. I am in no hurry to sell. Just got back from a overnighter to Santa Barbara Island it's nice to sit on the anchor fire up the generator to charge the batteries, run the microwave and squid lights. Days like that make me think twice about selling.


    Mike

  10. #10

    Default

    Mike,
    Fish report from SBI?
    Tenacious

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts