+ Reply to Thread
Results 1 to 9 of 9

Thread: SCARY STUFF!

  1. #1
    Join Date
    Mar 2009
    Location
    lakeside
    Posts
    178

    Default SCARY STUFF!

    While securing my new brake lines to my axle I found it is split 1/2" wide and 1/2 the length on the bottom and is failing. Glad I found it before I found out on the freeway. Ordering a new axle tomorrow. Needless to say my shakedown run for the weekend is cancelled. Gotta remove all the new brakes and wheels I just installed
    Last edited by Zarco; 06-02-2011 at 08:14 PM.
    26' billfisher

  2. #2
    Join Date
    Apr 2004
    Location
    San Diego
    Posts
    381

    Default

    Ah yes boats and boat trailers. Just remember the fish aren’t here yet and you still have plenty of time to get ready. I’ve been ripping the rock cod but its approaching tuna time. Time to get all of these issues addressed before the tuna shuffle starts.
    Yale
    "Riley"
    32' Blackman Sportfisher

  3. #3
    Join Date
    Mar 2007
    Location
    Anza, Ca
    Posts
    181

    Default

    Check with Mike he had two extra axles listed on here a while back. Not sure what the weight rating is or if he still has them but it is worth a shot.

  4. #4
    Join Date
    Mar 2009
    Location
    lakeside
    Posts
    178

    Default

    Trailer has been neglected since I bought the boat back in 2009(lived 5 blocks from shelter island launch but have since moved). Basically replaced everything but the frame which is still in good condition. I think the axle is defective? As it split where the seam weld is then the rust took over. Rear axle looks to be fine? Contemplating replacing it too??
    26' billfisher

  5. #5
    Join Date
    Jul 2005
    Location
    Lemon Grove
    Posts
    356

    Default

    Bummer Jason, but better now then later. I got both my turbos freed up and removed some of the older electronics: Loran and Fruno graph paper fish finder. I am not sure if I should dump them in the trash. I now have two Lorans and I know that they dont operate the Loran stations any longer. The paper graph is still in good condition. Jason, Let me know how much for the turbo. I like to have spare parts but depends on the price. I have one spare tire and rim, and 2 new radial tires without rims 16.5. I could use your 16.5 as a spare. When are you going to start fishing for Tuna? I would like to search some areas. Do you have a radio with a DSC and a MMSI number?

  6. #6
    Join Date
    Mar 2009
    Location
    lakeside
    Posts
    178

    Default

    Quote Originally Posted by Freespool View Post
    Check with Mike he had two extra axles listed on here a while back. Not sure what the weight rating is or if he still has them but it is worth a shot.
    That would be awesome if he does( wifey not happy with the blown boat prep budget )
    26' billfisher

  7. #7
    Join Date
    Mar 2009
    Location
    lakeside
    Posts
    178

    Default

    Quote Originally Posted by Al Gagnon View Post
    Bummer Jason, but better now then later. I got both my turbos freed up and removed some of the older electronics: Loran and Fruno graph paper fish finder. I am not sure if I should dump them in the trash. I now have two Lorans and I know that they dont operate the Loran stations any longer. The paper graph is still in good condition. Jason, Let me know how much for the turbo. I like to have spare parts but depends on the price. I have one spare tire and rim, and 2 new radial tires without rims 16.5. I could use your 16.5 as a spare. When are you going to start fishing for Tuna? I would like to search some areas. Do you have a radio with a DSC and a MMSI number?
    Not sure on the turbo( think benson claimed it).the rim is yours( I'll drink coors light ) don't have my mmsi yet. Try craigslist for the old electronics. Was thinking trailer work was done.
    26' billfisher

  8. #8
    Join Date
    Apr 2004
    Location
    Spring Valley
    Posts
    2,692

    Default

    My old axels are gone.

    Mike
    NoSlack-------------------------------------------<'(((>{

  9. #9
    Join Date
    Mar 2009
    Location
    lakeside
    Posts
    178

    Default

    Thanx anyway mike, got a local guy to build me a new one using my old spindles??? figure I'll try him before ordering one. At half the price.
    26' billfisher

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts