+ Reply to Thread
Results 1 to 6 of 6

Thread: Turbo????

  1. #1
    Join Date
    Apr 2004
    Location
    Mar Vista Ca.
    Posts
    149

    Default Turbo????

    Fired the boat up for a return trip from Catalina (West Cove) to MDR. 2000 rpm's is all I was able to get. Limped home, have not torn it down. I'm thinking turbo???



    Mike

  2. #2
    Join Date
    Apr 2004
    Location
    Spring Valley
    Posts
    2,692

    Default

    If you were getting black smoke, start with the turbo. If no smoke, start with fuel filters.

    Mike
    NoSlack-------------------------------------------<'(((>{

  3. #3
    Join Date
    Apr 2004
    Posts
    2,067

    Default

    If you're getting alot of black smoke in your wake then it would be the turbo, if not, replace your fuel filters first and if that doesn't fix it then it's time for an injection pump rebuild. Take your air cleaner housing off and see if the turbo spins at all.

  4. #4
    Join Date
    Apr 2004
    Location
    Mar Vista Ca.
    Posts
    149

    Default

    Thanks:

    Filters are all new, 1st trip with them. Did not notice excessive smoke in the wake. Only notice my floscan jump when I tried to throttle up. I'll take her apart this weekend.

  5. #5
    Join Date
    Apr 2004
    Location
    Carlsbad, CA
    Posts
    196

    Default

    If you noticed a large jump on your floscan, it could be your forward sensor. I have been told they are problematic. If turbo checks out, try a 3/8" dbl male barb and bypass the forward sensor.....Good luck.....zack

  6. #6
    Join Date
    Feb 2007
    Location
    Whittier
    Posts
    66

    Default Air Leak

    Since this was your first trip with the new filters; go back and check for an air leak from anything that you replaced, loosened or may have bumped.
    I had a similar problem once and simply tightened the bleed screw on top of the primary filter.
    Worked for me.

    P

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts