After doing a self fuel polishing of my remaining fuel in my tank, I plan on replacing my fuel sending unit and want to go with the puck type and not the swing arm model. Anyone out there have any ideas which is the manufacture to go with?
Mike
Fuel Sending Unit
After doing a self fuel polishing of my remaining fuel in my tank, I plan on replacing my fuel sending unit and want to go with the puck type and not the swing arm model. Anyone out there have any ideas which is the manufacture to go with?
Mike
Royal Hook
Go with a WEMA sending unit. measure the tank depth, deduct 1/2" and that's the size you need I think I installed a 12" sender. Order straight from WEMA or call A to Z Marine Services, 1214 Rosecrans Street, San Diego, California 92106
tel: (619) 224 1606 to see if they have it on the shelf. Same price as ordering it if I remember correctly.
Mike
Last edited by NoSlack; 11-07-2011 at 03:39 PM.
NoSlack-------------------------------------------<'(((>{
Tks. Mike
I was wondering if that was the unit to go with.
I called down to A-Z and they do have the 12" & 14" models for $46. My tank is 14" so I think I'll go online and get the 13.5" to be a little more accurate.
Tks.
Royal Hook
The tube has 10 segments of different resistance values from 32 ohms(full) to 240 ohms(empty). The float switches in a different resistor ever 1/10 of a tank. From now on you will see the gauge make jumps of a 1/10 of a tank at a time.
Mike
Mike
NoSlack-------------------------------------------<'(((>{
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote