+ Reply to Thread
Results 1 to 7 of 7

Thread: Dirty Habit 23 Albacore" Project"

  1. #1
    Join Date
    Jun 2013
    Location
    Lemon Grove
    Posts
    23

    Default Dirty Habit 23 Albacore" Project"


    Bringing home end of August to San Diego
    She'll be needing a new trailer, fuel tank, and some TLC.
    Anyone know where I can get a replacement teak cuddy door?



    New Member, John 510-220-1356 in Lemon Grove
    Last edited by Dirty Girl; 07-18-2013 at 09:19 AM.

  2. #2
    Join Date
    Apr 2010
    Location
    Escondido, CA
    Posts
    245

    Default

    John,

    How bad is the trailer? It didn't look that bad in the pics that the guy sent me. If you can save it with some work I'd stick with it considering the (lack of) quality of new ones and how proud they are of them $$$$$$$$. Glad you had the vision to see through the "ugly" unlike most of the haters on BD that wouldn't know what a good boat was if it bit them on the ass.

    Mike,

    I passed on that 10,000# aluminum. Turns out the tongue was bent pretty good. I ended up rebuilding the old Aros with new brakes and hubs. She survived the trip to BoLA so I guess there is plenty of life left in her. Well I guess enough life for me to build a 10k# one from scratch.
    Allan C.

    P.E.T.A MEMBER
    Portagee Euthanizing Terrified Albacore

    Hamachi Girl
    1981 23' Albacore Special

  3. #3
    Join Date
    Jun 2013
    Location
    Lemon Grove
    Posts
    23

    Default

    The Trailer is pretty bad.
    I've seen another fellow work wonders on a trailer i didn't think could be saved. Maybe worse than this one. I just don't want to go down that road, if possible.


    two tires on Starboard don't hold air. I may have to bring two tire/wheels combos.
    I can bring 4 hub/bearing/race/seal/bearing buddy kits from Pacific trailer, at $40 each for $160.
    I can't deal w brakes on a one day bearing job, so would make the drive w/o brakes 180 miles, Sylmar to Lemon Grove. Big GMC 2500 HD, don't think I need boat brakes. I drive very conservatively.
    The Trailer frame, is a rusted hulk, broken clear through, in two places at the rear cross frame. There is no 220V for a welder at the site, so I can bring my Oxy Acetelyne welder, but, welding very rusty steel, very iffy.
    I was hoping not to have to put ANY money into that trailer, but my inflatable, not selling, due to hard economy. My wishful thinking was inflatable sale would buy newer, used, trailer.

    What Alum trailer were you referring to?

  4. #4
    Join Date
    Apr 2010
    Location
    Escondido, CA
    Posts
    245

    Default

    Aluminum trailer was a used on CL. Used Navy surplus with a pintle mount. Guys wanted $2500 for it but with all the new hardware it needed I passed. Keep searching CL and something workable will come up.

    I'm guessing these guys

    http://sandiego.craigslist.org/csd/bod/3927569387.html

    Check with Freeway Trailers up in Escondido. I think I paid $25-28 for each Hub/bearing/seal manufactured from nothing but the finest materials China has to offer. This will get her home I guess.
    Last edited by Hamachi Girl; 07-19-2013 at 03:12 PM.
    Allan C.

    P.E.T.A MEMBER
    Portagee Euthanizing Terrified Albacore

    Hamachi Girl
    1981 23' Albacore Special

  5. #5
    Join Date
    Jun 2013
    Location
    Lemon Grove
    Posts
    23

    Default









    Rescued Dirty Girl's little sister from BFE today.
    Last edited by Dirty Girl; 09-01-2013 at 08:53 AM. Reason: add image

  6. #6
    Join Date
    Apr 2010
    Location
    Escondido, CA
    Posts
    245

    Default

    Sweet... now drop in a Chevy and get that thing wet.
    Allan C.

    P.E.T.A MEMBER
    Portagee Euthanizing Terrified Albacore

    Hamachi Girl
    1981 23' Albacore Special

  7. #7
    Join Date
    Jun 2013
    Location
    Lemon Grove
    Posts
    23

    Default

    I have a new, long block, engine for it. But need to find a blown one to get all the parts, like flywheel, flexplate, and accessories.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts