+ Reply to Thread
Results 1 to 4 of 4

Thread: Outdrive Shimming Required?

  1. #1
    Join Date
    Nov 2015
    Posts
    2

    Default Outdrive Shimming Required?

    Anyone know of external/ performance indications that the DP outdrive needs to be shimmed, or is it just routine to check shimming at 1000hrs?
    Mahalo, Sean

  2. #2
    Join Date
    Oct 2005
    Location
    Vista,Ca
    Posts
    194

    Default

    Hey Sean,
    By no means I'm I an expert on this subject but personally I would never ever crack a case open to check shim clearences if its working good.
    I've rebuilt a few OD and re sealed a few more and I only check end play and shim clearences when replaceing bearings and other internal metal parts.
    When I re seal an OD I put all shims in exactly the same place they came from and theirs never been a problem.
    If you want more info get on the Hull Truth web site
    Royal Hook

  3. #3
    Join Date
    May 2004
    Posts
    255

    Default

    I'm no expert either, but that sounds like good advice to me.
    Brian on Old Blue, out

  4. #4
    Join Date
    Nov 2015
    Posts
    2

    Default Thanks

    Thanks for the advice Old Blue and Royal Hook.

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts