'The Reel One' Winter Project Saga continues
Been keeping busy working on most of the boat at night, because most of the boat is in the garage.
Pictures below of Outdrive before/after, Transom Plate before/after, Building/fitting a new rear transom deck cover in progress, and Re-doing all the fiberglass around the transom cutout.
Outdrive Before Overhaul:
http://www.bocapix.com/data/500/medi...ve_before2.jpg
Outdrive After Overhaul:
http://www.bocapix.com/data/500/Outdrive_after.jpg
Transom Plate Before Overhaul:
http://www.bocapix.com/data/500/medi...ate_Before.jpg
Transom Plate Overhaul in Progress:
http://www.bocapix.com/data/500/medi...late_After.jpg
Re-Doing Fiberglass in Trainsom Cutout:
http://www.bocapix.com/data/500/medi...som_cutout.jpg
Engine Compartment without Rear Transom Deck Cover that was junk, after repaint:
http://www.bocapix.com/data/500/No_rear_deck_cover.jpg
Building new, fitting new, Rear Transom Deck Cover Section:
http://www.bocapix.com/data/500/medi...n_progress.jpg
New cover will be fiberglassed on both sides, unlike original.
On track to have back together by March 1.
Glenn (Wizard)
"The Reel One"
26' Billfisher