Been keeping busy working on most of the boat at night, because most of the boat is in the garage.

Pictures below of Outdrive before/after, Transom Plate before/after, Building/fitting a new rear transom deck cover in progress, and Re-doing all the fiberglass around the transom cutout.

Outdrive Before Overhaul:
http://www.bocapix.com/data/500/medi...ve_before2.jpg

Outdrive After Overhaul:
http://www.bocapix.com/data/500/Outdrive_after.jpg

Transom Plate Before Overhaul:
http://www.bocapix.com/data/500/medi...ate_Before.jpg

Transom Plate Overhaul in Progress:
http://www.bocapix.com/data/500/medi...late_After.jpg

Re-Doing Fiberglass in Trainsom Cutout:
http://www.bocapix.com/data/500/medi...som_cutout.jpg

Engine Compartment without Rear Transom Deck Cover that was junk, after repaint:
http://www.bocapix.com/data/500/No_rear_deck_cover.jpg

Building new, fitting new, Rear Transom Deck Cover Section:
http://www.bocapix.com/data/500/medi...n_progress.jpg

New cover will be fiberglassed on both sides, unlike original.

On track to have back together by March 1.