What is the fix? or has anybody had issues with the relays at the stern for the outdrive trim. seems to me that a one size fits all harness was used. meaning that my wire could work for my 26 and also for a 30 footer if needed and I have too much wire looped around down in the bilge which makes for a shoddy installation.
Not liking it as it is and just found that I had a bad relay for the lowering side. so if I need to change a relay I am thinking about redoing the harness to make it a bit more simplistic in its physical state. meaning that I could eliminate a lot of wire run and put the relays in a more assecible place.
Thoughts or been there done that comments?