Hey Marc, I remember seeing that tank when I came by your place.

Sounds like you are doing a bunch of work. Post some pics when you can, I'd like to see how its coming along.

Can't remember what size my factory tank was. It had to be around 46 or so, I put a Offshore 65 gal. in and it seems big. I call the new tank the deck level swimming pool. I found my old for sale ad on the tank. Here were my measurements if anybody with a 26' can compare:

- Foot print is 20"w x 38"l. Tank size, 18"w x 36"l x 32"h. 34"h at top.


That picture of the fitting / valve in my fix up thread is for the drain. I wanted that big valve on it just in case. If I remember right, the intake is still 3/4". My biggest problem with getting it to prime is the fact the boat hasnt been in the water in a stinkin' year! Turns out they dont prime in the driveway too well. I know that the closer / lower you get the pump to the intake or thru hull the easier it should prime. The new pump on my center console mounts right to the thru hull. Never an issue.