I had a problem with the water neck at the outdrive.
I had a problem with the water neck at the outdrive.
26' billfisher
Thanks guy's for the advise. I thinkI WILL GET a a new pump and try from threre. At least I know I have new pump and a spearI! If I need it or if some one else needs 1 off shore we HAVE ONE.
Jeff
P.S. ch16 @ island or ch 72. Sorry Alan, I get alot of engine feed back on ch 11.
Jeff
Last edited by Patron; 08-22-2011 at 11:51 PM.
yale,
How did u know? I must have told you.....lol.. I put a new flushing system on The PATRON and it works bitchn'. Replacing the raw water pump(on everybody's advise) loll......freash water pump today. Always have to work on BOATS. Thats why noahs ark was inveted... so MAN can work on boats from now on...
Jeff
One more drawing to look at
http://www.marinepartseurope.com/en/...0-26-3399.aspx
Book mark the marinepartseurope.com site it's my go to site for finding part numbers and seeing how thing go together. Once you have your number, search a US site for a price.
Mike
NoSlack-------------------------------------------<'(((>{
Thanks Mike... pretty sure I fried the seal trying to flush her out when I got her home. Talked Grant @ sea & skin marine and he conferms the pump is F#$%ed up. So I am going to rebiuld and will let you know.
Jeff
Last edited by Patron; 08-23-2011 at 06:06 PM.
When you get it apart, take a real good measurement of how much shaft is exposed on the engine side of the bearings. You need to press the new ones on to the same place. No shoulder or snap ring to press them to. It's all a matter of press and measure to get them in the right place.
Mike
Your pump parts will look similar but a little smaller than these.
Bad seal got the bearings wet
Your pump uses 2 seals. As bad as this looks, it was still working fine with a little bearing noise if you really listen close.
new parts
Last edited by NoSlack; 08-23-2011 at 08:03 PM.
NoSlack-------------------------------------------<'(((>{
Good info Mike. Thanks for sharing!
I have 4 pumps and rebuild kits to match. Let me know if you need one.
26' billfisher
I would be interested in one of each PM me when you can.
There are currently 1 users browsing this thread. (0 members and 1 guests)