280dp Bearing housing
I noticed I had some back and fourth play in the props, after removal I found the bearing housing damaged to the point it took out the shaft seals. Without telling the reason as to why it was damaged which was my own fault.
Does anyone have a lead on where I can find a used one? Maybe even a complete lower or drive.
23 Fishmachine
If I can't fine it on ebay, I get my outdrive parts from Outdrive Exchange in Costa Mesa. I bought my dp lower end from them.
NoSlack-------------------------------------------<'(((>{
I'm guessing from the picture that there's not enough depth to handle the double seals.
What depth do you have left?
Sent you a PM.
If your still in need.
I'd like to get your VP part # for your outdrive and ill look around.
Royal Hook
Thanks for the help, I ended up taking it to the Outdrive exchange replaced seals, bearing, oil everything done for $600.00 didn't seem to bad.
Marc
23 Fishmachine
I am running A2 props and the inside 3 blade had some small damage so I was thinking of replacing it. The owner of Outdrive exchange has an inside B2 and stated it is the same as the A2 and it would preform the same? Anyone have any experience with mixing the props?
I know the A's are for diesel and the B's are for both diesel and gas.
I am having a hard time believing they are the same?
Marc,
23 Fishmachine
Good job, a new bearing housing alone is 6 bills.
Royal Hook
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote