Bob: I have the same auto pilot. I used to have that problem too. It works perfect now. Give me a call and I will tell you what I know. It is easier for me to talk than type. My cell number is (858) 945-6594 or at home (858) 459-8066. Dan
Bob: I have the same auto pilot. I used to have that problem too. It works perfect now. Give me a call and I will tell you what I know. It is easier for me to talk than type. My cell number is (858) 945-6594 or at home (858) 459-8066. Dan
Bob, don't be misled! I went fishing with Dan last week and the way he solved his problem was to drink more beer and get sloshed; he couldn't walk a straight line much less drive one ! It's easier for him to not know where he's going than to fix the AP, the perfect solution! Thank God he had 53 miles to sober up before he had to negociate the slip docking; I will admit he was able to find tuna however!![]()
If the AP is acting a little lazy, it's most likly dirty contacts and should be easily corrected if you clean the contacts in the control unit.
Pop the front cover open by pushing in one of the spring pins on either side of the control unit(use a small nail to push the pin). Once you get the cover open take some contact cleaner and give the post and 3 contact fingers a good cleaning.
If all else fails, pull it out and send it back to Benmar (LA area) for a tune up.
Mike
![]()
Last edited by NoSlack; 01-13-2019 at 07:37 AM.
NoSlack-------------------------------------------<'(((>{
Bob: What Mike just explained was what I was going to tell you to do. He has all the modern technology to post the pictures and the elegant words to describe how to fix it. Good luck and by the way it only took me 45 miles to sober up which gave me time to clean all the fish Jeff caught before we got back to the dock.
Hi Guys, Sorry it took a while to respond. I just got back from Catalina.
I will try to clean the contacts. Dan- I will try you at home tonight (Friday).
Thanks Bob
Jeff -
You know Dans motto:
if you don't know where your going....any road will get you there!
Charlie
NOMAD
Hi guys, I opened up the binnacle and the contacts looked clean. However, I found that the cable had a slightly frayed end and was not inserted completely. I repaired this and put it back together. The manual talks about adjusting the gain with a pot adjustment. I will be on the water Monday and give it a test.
Thanks for the help.
BTW- with out the AP we need alot of beer. The moto is "No Beer, No Steer"
There are currently 1 users browsing this thread. (0 members and 1 guests)